Home > JTDX WSJT-X v1.7 based HF evaluation version by UA3DJY


 

JTDX WSJT-X v1.7 based HF evaluation version by UA3DJY

WSJTX-UA3DJY

 

UA3DJY IgorさんがWSJT-X v1.7.0 r6462のJT65AデコードルーチンをHF帯でのデコード特性を向上させた拡張バージョン。

Three-pass decoding や Preamp を搭載してオリジナル版WSJT-Xよりデコード率が高い。

強力な局の隣接周波数の局や同一周波数局でもDTが微妙に違う場合は難なくデコードできる。素晴らしい特性。

ただしデコード時間が多少長くなるのとCPU負荷が増すので旧型CPUでの使用はお勧めできない。

UA3DJY Igor, Photo


WSJTX-UA3DJY

 

改版内容

改版内容 r6462mod15.1:

アドバンス タブに 'Hinted decoding DT range' が追加されました.
It allows user to set up possible DT range for hinted decoding, if DT value of candidate getting into this range this candidate will be passed to the hinted decoder.
This way user could reduce number of the false hintend decodes and decoding time for some intervals.
'Hinted decoding DT range' can be set to any value from 1 to 5, and this table shows DT thresholds applied in the software:

WSJTX-UA3DJY

Hinted decoding bandwidth in mod15 limited to 7Hz before the frequency correction, in mod15.1 before and after the frequency correction, resulting in reduction of the false hinted decodes.


 


 

改版内容 r6462mod15.2:

- implemented additional hinted decoder for 'DX Call' and 'DX grid' data - hinted decodes now marked by the asterisk, not supported in the left decoding window if 'Show DXCC and worked B4 status' is enabled.


 


 

改版内容 r6462mod15.3:

- additional criteria implemented for hinted decoding: distance between the best codeword
and Gaussian(AGWN) noise, increasing probability of hinted decodes for the CALL3 and DX Call decoders.


 


 

改版内容 JTDX v15.4:

- additional, third criteria: multiplicative combination of the two previous criterions applied
in the CALL3 based hinted decoder, allowing to reduce number of the false CALL3 based hinted decodes
with no decoder's sensitivity degradation

- DX Call based hinted decoder is stepped down to mod15.2 source code for non CQ messages only.
It reduced number of the DX Call based false hinted decodes as tradeoff of sensitivity

- corrected UI defect of mainwindow expansion for WSPR2 mode

- two new buttons are put in the main window: Hint and Clean DX, last one can be triggered by ALT-X combination.
New buttons make user interface as more friendly one, allowing user to avoid some false hinted decodes.

- transition started from modified WSJT-X to standalone JTDX software


 


 

改版内容 JTDX v15.5:

- proper software name indication in station information and statistics in the pskreporter.info wed site
- spots with RR73 grid locator blocked for reporting to pskreporter.info
- spots with hinted decodes blocked for reporting to pskreporter.info
- DXCall and DXGrid windows autoclearance if CQ button is clicked


 


 

改版内容 JTDX v15.6:

- fixed defect with SWL mode, after SW restart SWL mode on settings were not applied in previous versions
- fixed minor defect in UI1 where standard/free message windows size was shrinked, this defect coming from v15.4
- implemented additional, CALL3 based, wideband hinted decoder for CQ messages with -28dB SNR sensitivity, this functionality
can be activated by the Hint button. DT range is limited from -0.5 to 1.0 for this decoder.
- implemented CQ DX standard message, user can choose between CQ and CQ DX message using DX checkbox
- implemented Filter functionality: 400Hz bandwidth is used for decoding, 100Hz bandwidth is used for displaying decoded messages
- implemented asterisk indication of the hinted decodes for 'Show DXCC and worked B4 status' feature
- UI is modified with Filter button and DX checkbox to support new functionality

JTDX v15.6 hinted decoder sensitivity should have the same vaues as of v15.4:


 


 

改版内容 JTDX v15.7:

- removed unnecessary spectra recalculation for every candidate, now JT65 spectra being recalculated only if previous
candidate was decoded and signal subtracted. This fix shall make decoding a bit faster.
- turned on signal subtraction on the 3rd decoding pass, reduced number of the false FTRSD decodes
- fchisq65 and afc65b source code is modified, now providing better DT calculation accuracy and reduced number
of the false FTRSD decodes


 


 

改版内容 JTDX v15.8:

- new wideband hinted decoder implemented for the CQ DX message
- turned on CQ and CQ DX wideband hinted decoders on the 2nd and 3rd decoding passes
- modifed source code fchisq65, got more linearity and better accuracy in DT calculation
of the weak signals, bringing more correct FTRSD decodes
- implemented FTRSD decoder bypass if initial SYNC value on the QSO frequency is less than 1.0
- implemented filtering of some false 17 and 18 character long FTRSD decodes if DT
of the signal is outside of the -0.5...1sec range, source code chkfalse.f90. CALL3.TXT
file data is used for this functionality and this filtering is not activated if number
of records in CALL3.TXT file is less than 16000. CALL3.TXT data loaded in memory
at the first attempt to check decoded message.
- modified JT65 signal simulator with CQ DX message
- minor change in UI, tab name Help -> About JTDX


 


 

改版内容 JTDX v15.9:

- correlation function thresholds (ccfbest variable) implemented for various negative DT ranges,
this approach lets to decrease number of candidates hence decreasing decoding time
- fifth decoding pass is implemented. This functionality will gain number of the decoded messages
if number of signals on the band is greater than 20. There is also gain in weak signal FTRSD
and hinted decodings.

WSJTX-UA3DJY


 


 

改版内容 JTDX v16.0:

- filtering of the false FTRSD decoded messages expanded down to the 14-character message length
- additional criterion(0.005sec DT offset) implemented to filter out FTSRD false decodes with grid
locators caused by the SYNC signal harmonics (bad TX signal or IMD in the RX path), the same
chkfalse.f90 source code is used for filtering, also based on the CALL3.TXT file
- checking for SYNC harmonics implemented, based on three criteria: DT offset, ccfbest value,
frequency greater than 1500Hz. Wideband hinted decoders bypass is used if signal meeting these
criteria.
- mouse left button double click on the waterfall now triggering 'Filter' functionality where messages
will be decoded and signals subtracted in 400Hz bandwidth, but only messages in 50Hz bandwidth
will be shown in the decoded messages window. This is a bit different from the 'Filter' button
functionality where messages shown in the decoded window within 100Hz bandwidth
- found and fixed defect: wrong signals were subtracted for hinted decodes
- cleaned up some rubbish and some not used code, many integer variables changed to the logical type.

WSJTX-UA3DJY


 


 

改版内容 JTDX v16.1:

- JT65: eliminated minor defect of wrong signal subtraction for decoded messages on the QSO frequency
by the hinted decoders
- JT65: added new source code for calculation power of last 8 symbols of the SYNC signal. For the first pass
of decoding, list of the signals/candidates being sorted now basing on new criterion: multiplication
of the CCF and last 8 symbols power values.
- JT65: implemented signal subtraction for the dupe decoded messages on the first pass of decoding
- deleted JT65 program source code, this software was used for the test purpose
- deleted JT4 related Fortran source code
- JT65: withdrawn (21 + QSO frequency) number of candidates limitation for the first subpass of the first
pass of decoding
- country file cty.dat updated to version CTY-2608

 


 

改版内容 JTDX v16.2:

- minor defect fixed: in v16.1 index of the dtchk data structure could go out of boundary
if there is heavy distortion in the RX audio path. Two patches applied: index maximum value increased
from 200 to 300 and maximum number of candidates for first decoding pass is limited to 150.
- activated four threads for Fast Fourier Transform in the filbig.f90 source code
- cleaned up and checked logic in source code jt65_decode.f90 sync65.f90 xcor.f90 symspec65.f90
- at first decoding pass in jt65_decode.f90 applied dynamic threshold for candidate choosing based
on the first three most SYNC values, if there are less than 9 candidates detected in sync65.f90
- major defect fixed: starting from v15.9 values from FTRSD decoder were not passed to variables
nrtt1000, nhard_min, ntotal_min in jt65_decode.f90. This bug caused most of the FTRSD false decodes.
- sync value thresholds increased in syn65.f90: for (QSO frequency +-1Hz) applied threshold 0.4,
for (QSO frequency +-3Hz) changed threshold from 0.5 to 0.8. This changes eliminated some false hinted
decodes as trade off of hinted decoding sensitivity on the QSO frequency.
- minor defect fixed: variable qsofreq was initialized in wrong place in sync65.f90
- applied corrected frequency value for signal subtraction in subtract65.f90
- Echo and ISCAT modes now accessible in the optional user interface only


 


 

改版内容 JTDX v16.3:

- minor defect fixed: srand generator was used in FTRSD in 2nd...4th decoding passes if number of candidates
is less than 8, this bug could cause some false FTRSD decodes
- minor defects fixed: in logic of candidate processing in decode65a.f90 and in making of the candidate list
in sync65.f90
- decreased SYNC threshold trhesh0 for first decoding pass in jt65_decode.f90 and sync65.f90 from 2.5 to 2.3,
with automatic value choice of this threshold, based on the SYNC values of the signals
- limited thresh3 usage in jt65_decode.f90 by first subpass of the first decoding pass
- reworked and changed decoder bypass decision logic, fixed minor bug that might cause some false decodes
- limited DT range for making candidate list in sync65.f90 to -5.3 ... 5.2 sec
- changed sampling frequency value from 1378.125 to 1377.2321 in decode65a.f90, afc65b.f90, twkfreq65.f90
- increased resampling factor from 4 to 8 in fil6521.f90
- decreased LPF bandwidth twice in fil6521.f90, improved attenuation in stopband from 38 to 60dB
- adjusted reported SNR value
- multiple source code calculation accuracy and clean up changes


 


 

改版内容 JTDX v16.4:

- defect fixed: wrong response message was selected on mouse double click
on the 'mycall hiscall RR73' message
- defect fixed: one of the variables in SYNC tail power calculation was not initialized
- defect fixed: 4 arguments were passed while calling decoder.f90 in jt9a.f90 subroutine
while only 3 are accepted
- came back to 1378.125 Hz sampling frequency in decode65a.f90, afc65b.f90, twkfreq65.f90:
corrected an accuracy error I introduced in v16.3 due to the wrong usage of calculator
- in filbig.f90: increased number of taps of the anti-aliasing LPF filter from 15 to 499,
fully utilising filtering efficiency in the frequency domain
- in fil6521.f90: increased number of taps of the anti-aliasing LPF filter from 21 to 23
- in fil6521.f90: implemented one more 21-tap LPF filter with 172Hz sampling frequency
to improve further processing of the candidate's SYNC pattern
- adjusted fil6521.f90 processing delay in DT value, decode65a.f90 source code
- changed to static ones some variables in the signal processing to reduce negative affect
of the current software memory leakage on the signal decoding stability
- in hinted decoders reduced number of the static variables to decrease memory usage
- adjusted SNR indication after filter changes in fil6521.f90


 


 

改版内容 JTDX v16.6:

- changed default configuration settings(used for first start of JTDX software):
mode=JT65+JT9, modeTX=JT65, LockTX=RX is OFF, CQ
waterfall settings: bin/pixels=5, JT65 2400 JT9, N Avg=1, Flatten is OFF, Current
Advanced tab: decoding attempts=3, decoding passes=4, hinted decoding DT range=1
Colors tab: default colors
font settings of the decoded message: Consolas, 11, Bold

- changed user interface UI1:
interval time progress bar now has red color for TX, green color for RX
clock moved, date is deleted
dial frequency and UTC labels background colors changed to gray one, text to deep blue color
direction of TX to RX and RX to TX frequency overwriting is shown by arrows now
WSJT-X icon in the taskbar will be blinking if other application is active and decoded message containing user's call

- DXCC country prefix being now shown instead of the country name, it has no connection to the 'worked B4' functionality

- decoded CQ message now being shown with text color instead of the background color

- changed 'Worked B4' functionality, background colors can be activated independently for any option and will be applied according
to this hierarchy order:
new DXCC per log
new DXCC per band or (new DXCC per band and per mode)
new call per log
new call per band or (new call per band and per mode)

Additional buttons created in Colors tab to support new 'Worked B4' functionality.
- changed configuration Settings, in the General tab added new 'Worked B4' and 'beep on my call' controls

- symbol '@' in the macros being now substituted by 'DX Call'

- fixed minor defect of the missed background color for AnswCQ label in the user interface

- added sound alert by system sound for user call presence in the decoded message. Starting from MS Windows Vista default Audio device is used for this alert, in MS Windows 10 this system sound is called as 'default beep'. This functionality was not tested under Linux.

- SkipGrid/Skip TX1 checkbox added in the QSO controls widget, message with report will be generated first if this box is checked.
This functionality is aimed for making shorten QSOs.

- defect fixed in symspec65.f90 source code, ref22(NSZ) array was not declared there

- mouse left button double click on the decoded standard message will change RX frequency if LockTX=RX checkbox is not checked.
If Ctrl button pressed, mouse left button double click on the decoded standard message will change RX and TX frequency.

- pressing F7 keyboard button will open log file wsjtx_log.adi by editor software set in the operating system for .adi extension


 


 

改版内容 JTDX v16.6.1:

JTDX v16.6におけるWindowsXPでの不具合を修正。


 


 

改版内容 JTDX v16.7:

- code is added to recognise country properly for CQ NA, CQ AS and similar free text messagesM

- step deltaa(3) is changed to 2.0 value in the afc65b.f90 source code

- JT65 SYNC decimation filter is moved from time domain to the frequency domain, from fil6521.f90 to filbig.f90 source code, fil6521.f90 source code is obsolete now

- current time and date is added to the status bar


 


 

改版内容 JTDX v16.8:

- interval time added to separation line in the left decoded text window

- new filters implemented in the filbig.f90 source code

- reworked source code: xcor.f90, afc65b.f90, fchisq65.f90 and twkfreq65.f90. setup65.f90 source code is not used anymore for building software, required functionality moved to the decode65b.f90 source code. Minor changes in the decoder.f90, jt65_decode.f90, sync65.f90 and decode65a.f90 source code.
- minor changes in user interface UI1: smaller application window size can be set now by user

- application and widegraph titles are changed to JTDX, installation path is changed to C:\JTDX\

- SNR is adjusted in the -01...-31dB range with approximately 1dB accuracy. Simulated wav files were used for calibration, SNR offsets 1dB step array added to the jt65_decode.f90 source code. v16.8 WSJT-X.INI file is compatible with JTDX v16.7, v16.6 and v16.6.1, there is no action needed for upgrade from any of these version to v16.8. v16.8 WSJT-X.INI file IS NOT COMPATIBLE with older than v16.6 JTDX software versions and any WSJT-X software version. It should be deleted by user before the first run of the JTDX v16.8 software, all settings then should be configured from the very beginning.


 


 

改版内容 JTDX v16.9:

- twkfreq65.f90 source code is not used for building software, frequency correction functionality is moved to decode65a.f90 source code

- linear signal frequency drift taken into consideration for signal subtraction

- corrected lag range for correlation function in the ccf2.f90 source code

- updated Hamlib3 for new transceiver's CAT support

- SYNC signal power calculation is implemented in the decode65b.f90 source code, dupe candidates with the same SYNC power are banned now to go to the decoders

- QSO frequency candidates now have second decoding attempt with 1 sample offset at 1378.125 Hz sampling frequency, it has improved decoder's sensitivity.

- in overcrowded band conditions and at first decoding pass: QSO frequency candidate from the first position being now added to the last position of the candidate list, to get benefit from the signal subtraction

- defect fixed: mouse's left button double click on the waterfall(is used to decode signal again with Filter functionality) caused TX mode change from JT65 to JT9

- major defect fixed in making of the candidate list, soutce code sync65.f90, this bug affected decoding stability starting from JTDX version 16.3


 


 

改版内容 JTDX v16.9.1:

- false decode filters are reworked for FTRSD decoder in the source code decode65b.f90

- new candidate selection criterion is implemented for decoding passes 2...4 in sync65.f90.
DT is multiplied by SYNC value, candidates with -0.5...+1 sec DT range have highest priority, linear
DT slope factor function is applied to the criterion for candidates having DT outside of this range.


 


 

改版内容 JTDX v17.0.1:

- software installation is changed, logbook and settings file are stored in folder %LOCALAPPDATA%\JTDX, settings file has name JTDX.INI now. Prefix in the interface name for UDP connection is changed from WSJT-X to JTDX.

- implemented mutiple instances support for JTDX <-> JTAlert interaction, where multiple JTDX instances running using key '--rig-name=' (suffix of the interface name for UDP connection). This functionality is supported in JTAlert 2.8.5. Every JTDX instance shall be configured with unique UDP port number in the Settings-Reporting tab.

- defect fixed: starting from JTDX v16.9 there was excessive decoding time if there were few signals on the band. This defect also caused too high sensitivity of the Hint decoders and some false hinted decodes.

- WSJT-X patches r7229, r7233 are applied: TX audio level settings saving per band

- TX audio level settings saving feature is expanded to the 'per band and per mode' basis, many thanks to Arvo ES1JA for provided source code and testing this functionality

- minor change in the functionality is done: TX mode is set to JT65 instead of JT9 if user changing mode from WSPR to JT65+JT9

- minor change in configuration is done: hyphen sign is allowed now in 'My Call' window, letting to use complex SWL callsigns for band monitoring with spots reporting. Many thanks to Oleg US-E-12 for provided solution.

- software crash is fixed, caused by getting index of the dtchk() data structure out of the top bound. Message 'input audio signal is distorted' being generated now and decoding this minute interval being interrupted, while software will handle this issue and will continue to work.

- Hint decoders bypass is implemented for scenario where signal SNR is greater than -05. This solution will allow to decrease number of the false hinted decodes for distorted audio signal with no affect on the sensitivity.



 

 


 

改版内容 JTDX v17.1 ( ES1JA 版 ):

- decoding passes logic is changed in jt65_decode.f90, in result there is increased number of the weak signals decoded by FTRSD

- defect is fixed, if callsign is clicked in JTAlert initial CQ message is now propagated into RX frequency window. Many thanks to Arvo ES1JA for this patch. Thanks to Ed K0KC for reporting of this bug.

- changed functionality for accepting decoded message from two Hint decoders operating on the RX frequency: decoded Hint message is banned as the false one if there was message decoded by BM/FTRSD on one of the previous decoding passes that contains the same callsigns. It should reduce a bit number of the false Hint decodes. Thanks to Luc VE2FXL for reporting of this scenario.

- new functionality is implemented for one of the four Hint decoders which working on RX frequency with CALL3.TXT data: five minute (5 min 14 seconds) timer is (re-)started at end of the each transmission or if Hint button is activated by user, it is used to automatically enable/disable propagation of the non-CQ decoded Hint messages from this decoder. The messages will be shown on the screen if timer is running and are banned if timer is expired. Hence if user making QSO then all messages being accepted from this decoder, if user going to the passive mode of band monitoring then in five consecutive RX intervals non-CQ messages from this decoder will be banned. Such approach will let user to reduce number of the false Hint decodes being in the band monitoring mode.
Thanks to Luc VE2FXL for reporting of this scenario.

- first step done towards assisted BM/FTRSD decoder functionality. Upon exceeding defined thresholds decoded messages being checked with the matched filter against the received signal. If it is free message in it is not matched, then this message is banned. In case it is standard message and it is not matched, then it is checked against CALL3.TXT data if any of two callsigns exists in the CALL3.TXT. Standard message being treated as false one if both callsigns are not found in the CALL3.TXT file.
This approach lets to ban from 30 to 50 percents of the false FTRSD decodes.

- expanded sound notifications for the 'non-worked B4' status functionality. Many thanks to Vytas LY3BG and his son Rimas Kudelis for supplied source code and making tests of this functionality.


 


 

改版内容 JTDX v17.2:

- fixed wrong UTC indication if interval or audio wav file being decoded again by Decode button

- fixed wrong 'new one'(worked B4) functionality notification for single JT9 or JT65 mode of operation, many thanks to Vytas LY3BG and Rimas Kudelis for this patch

- auto stop Hint five minute timer is also applied to DX Call Hint decoder. Thanks to Luc VE2FXL for reporting of this scenario.

- directional CQ WSJT-X patches 'CQ AA'- 'CQ ZZ' (E9AA-E9ZZ) r7289, r7294 are applied. It is standard type message user may type now in the free message box

- '@ TNX 73' TX macro is set as default free message, where '@' symbol handles 'his call'

- RX frequency CALL3.TXT data based Hint decoder is split to the message specific decoders, memory usage for this group of the Hint decoders is reduced. There are three decoders now in this group:
- 'CQ hiscall hisgrid' message decoder
- 'mycall hiscall hisgrid' message decoder
- 'mycall hiscall report' message decoder, where report is -01...-30 only. R-01...R-30 report messages are not supported now in this group as these messages are covered by DX Call hint decoder

- new wideband experience based Hint decoder is implemented, bringing approximately 5% more decoded messages for number of decoding attempts set to 1 in the Advanced tab. This decoder using call/frequency data from the last two consecutive RX intervals.



 

改版内容 JTDX v17.2.1 ( ES1JA 版 ):

JTDX v17.2.1 - is based on JTDX v17.2, has got alternative improved and expanded 'new one' notification functionality, implemented by Arvo ES1JA. This version is especially created for public testing and this 'new one' notification functionality might come in the main JTDX branch if accepted by majority of users.

It is recommended to use default colors until this functionality is understood by user, and to set only required criteria for checking.

So far it is possible to reset color settings to the default values, only if JTDX.INI file is deleted.

- fixed bug (v17.1.1) where grid locator was not extracted correctly from the non-CQ standard messages.

- strikethrough or underline may now be used as notification for the Woked Call in CQ and MyCall messages. Underline is set by default.

- background color may now be used for the Worked Call notificaton, standalone or togehter with strikethrough or underline of the decoded CQ and MyCall messages.

- if 'Inverse text/background color' checkbox is checked:
'CQ' and 'MyCall' messages met the 'New..' criterion will use their setting's text color as the backgound color, while 'new..' color will be used for text in these messages. If there 'New..' criterion is not met then 'Worked Call' color will be used for text in these messages if it is activated.

Tx messages always have background color notification.

All other standard messages will be using 'Standard Message' background color and 'New...' text color notification if 'Check all standard messages' checkbox is checked, otherway there is no any checking performed for these messages.

- user now can choose 'Standard message' background color (in 17.1.1 it was hardcoded as gray one). Gray color us set by default.



 


 

改版内容 JTDX v17.2.2:

JTDX v17.2.2 - is based on JTDX v17.2.1, has got alternative improved and expanded 'new one' notification functionality, implemented by Arvo ES1JA. This version is especially created for public testing and this 'new one' notification functionality might come in the main JTDX branch if accepted by majority of users.

v17.2.2 fixes some bugs found in the version 17.2.1:

- Bold font usage failure

- '@ TNX 73' TX macro is set as default free message, where '@' symbol handles 'his call', user would have to delete old JTDX.INI file to make this change visible

- several bugs where 'New ..' status was incorrectly reported

Important note to the functionality description: 'Worked..' notification is a remaining action of the 'New..' checks, and as per design it being applied to 'CQ' and 'MyCall' messages only.

 


 

改版内容 JTDX v17.3:

- DX Call based Hint decoder is split to the four focused decoders, bringing JT65 decoding sensitivity down to -34dB SNR:
- decoder for CQ/CQ DX messages
- decoder for messages with '-' reports
- decoder for messages with 'R-' reports
- decoder for RRR/RR73/73 messages

- time transition from 23:5x to 00:0x is covered by uninterrupted interval numbering within 7 consecutive days of running JTDX software, this lets to support experience(previous intervals) based Hint decoders funcionality for the date change time window

- new wideband experience(previous intervals) based Hint decoder is implemented for the basic CQ and full range of directional CQ messages (CQ AA to CQ ZZ)

- disabled RX frequency CALL3.TXT based Hint decoder, which processed report "-" messages. This functionality is covered by DX Call based Hint decoder with better sensitivity and less resource being used.

- for DXCall based Hint decoders, excluding CQ/CQ DX decoder, data from previous decoded intervals being used now together with data from the DXCall window

- excluding CQ/CQ DX message, other DXCall Hint decoders using additional trigger for getting turned on: RX frequecy change

- adjusted thresholds for all 10 Hint decoders using ratio (maximum sensitivity)/(acceptable number of the false decodes) as criterion

- expanded filters for the false FTRSD decodes, being now used QTH grid square and callsign prefix data

- modified filter of the standard messages for the 'new one' notifications

- notification settings are put in the common tab with the color settings, 'Notifications' tab in the Configuration user interface

- applied WSJT-X patch r7360, to recover CW ID transmission for long callsigns

- updated CALL3.TXT file as of December 12th 2016, 17340 records, supplied with the JTDX software package.

Now there are 10 Hint decoders in the JTDX v17.3 software, using matched filters in wide bandwidth or RX frequency, focused on some range or specific messages, and using data from CALL3.TXT file or from previously decoded intervals or from DXCall/DXGrid windows. All these decoders are activated by the Hint button, but some of them being turned off using timer and being brought back in service by transmission of the message of by change of the RX frequency.

There is unchangeable DT window set in the code for some Hint decoders, previous intervals data based Hint decoders using +-0.2sec DT window to the last decodes to process candidate, and only for two Hint decoders working on the RX frequency and based on the CALL3.TXT data user may change DT range in the General->Advanced tab settings.

JTDX software is made in such way that vast majority of the Hint decoders functionaly goes invisibly to user, and from user's point of view all Hint decoders being controlled by the Hint button.



 


 

改版内容 JTDX v17.3.1 ( ES1JA 版 ):

- displaying country name/prefix is aligned

- notification filters are implemented and improved for all possible standard messages

- now it is possible to apply striked/underlined 'worked B4' notifications to the standard messages other than containing 'CQ' or 'MyCall'. This functionality may be switched on/off by user.

 


 

改版内容 JTDX v17.3.2 ( ES1JA 版 ):

JTDX v17.3.2 - is based on v17.3.1 source code, vast majority of the changes made by Arvo ES1JA

- fixed bug of new DXCC notification if there is no user callsign set in the settings

- fixed defect that allowed to check in 'Show prefix not name' box if 'Show DXCC names' is not checked

- more filters added to prevent 'New one ' criteria being triggered by the free text messages

- deleted checkboxes for setting striked/underlined 'Worked B4' notifications for other than CQ/MyCall standard messages

- changed color notifications for other than CQ/MyCall standard messages from background color to the text color. Now all checks setting the same attribute: either background color or text color.

- some changes for 'Bold' font attribute usage: now all 'New ' criteria checks setting 'Bold' attribute for decoded text message, if any criterion is met

- added QSO counter in the status bar, at right bottom corner of the user interface. wsjtx_log.adi being used to count JT65/JT9 contacts.

- added date for every decoded message in the ALL.TXT file. It shall simplify searching for any QSO missed in the logbook.

It is not recommended to set 'Bold' attribute in the decoded text font settings(Settings->General tab), as 'Bold' attribute being used in the 'New one ' notification functionality.


 


 

改版内容 JTDX v17.4:

JTDX v17.4 is based on the v17.3.2 source code

- all FTRSD false decode filters reworked and moved as block close to the FTRSD decoder, allowing to attempt decode candidate with Hint decoders if decoded message is considered as the false one

- implemented AGC compensation functionality, where noise level change triggered by AGC operation in the receiver being compensated in JTDX software, bringing improved decoding efficiency while AGC is in operation. AGCc button is implemented in main user interface to turn ON/OFF this functionality. This button shall be turned off by user if JT signals are not strong enough to trigger AGC or if AGC is turned OFF in the receiver.

- most of the checkings for the false FTRSD decode now based on information from the ALLCALL.TXT file. This file is installed into /bin/data/ path by the JTDX v17.4 installer and has a list of callsigns spotted in JT modes for last couple years. CALL3.TXT file being now mostly used for Hint decoders operation and containig data from JT spots of the last months.

- 'New one' notification functionality is modified: added preview pane in the Notifications tab of the settings. It has simplified notification color settings. This functionality is designed and implemented by Arvo ES1JA.

- decoded message windows now have table format. Special cell with red color background being used now for additional notification for decoded messages containing MyCall. It makes easier to recognise decoded messages if somebody responding to user outside of the RX frequency.

- now user can send QSO data to the eQSL server. Configuration settings are added to the Reporting tab. This functionality is implemented by Arvo ES1JA and may be switched ON/OFF by user.

- introduced independent notification funcationality per band and per mode. This functionality is designed and implemented by Arvo ES1JA.

- implemented selective DXCall Hint decoders activation based on the last transmitted message. This feature has reduced number of the false Hint decodes on RX frequency during the QSO.

- applied +-0.2 second DT window to most of the DXCall Hint decoders, centered to DT value of the last decoded signal. This functionality has reduced number of the false Hint decodes on RX frequency during the QSO.

- CQ/CQ DX DXCall Hint decoder is splitted to two decoders: one is for CQ, other is for CQ DX message. Temporarily suppressed sensitivity of the CQ DX message DXCall Hint decoder, planning to finish this functionality in the next JTDX version.

- new DXCall Hint decoder is introduced for 'MyCall + HisCall + GRID' message, just in case of retransmission of this message during the QSO. Now JTDX v17.4 has got twelve Hint decoders.

- now SRAND random number generator is used in FTRSD decoder for any signal candidate coming with SNR less than -24dB. Combined with several decoding passes, SRAND usage has increased decoding efficiency of the weak signals.

- expanded DECODE button usage to decode again the JT9 signals, that might be used while switching ON/OFF AGCc button.

 


 


 

改版内容 JTDX v17.4-SWL:

JTDX v17.4-SWL is based on the v17.4 source code

- expanded JT65 SNR reporting range from -35 to +35dB

- banned transmission of the messages, as JT65-HF software does not support reception of messages with reports in the extended range

- minor changes in the ALL.TXT file format


 


 

改版内容 JTDX v17.5:

JTDX v17.5 is based on the v17.4 source code

- memory allocation is reworked for the large arrays of JT65 and JT9 signals

- defects fixed: ALLCALL.TXT file allocation for MAc OS-X and Linux builds, several bugs in the 'notifications' functionality, wrong GRID square indication in DX Grid window if any other callsign's report/RRR/73 message is clicked, wrong country name displaying for free text messages containing TU73, in notification about loss of connection to the eQSL server, wrong interval time displaying if JT9 messages decoded again using Decode button, added extra notification about copying CALL3.TXT file to the log directory, bug of displaying messages with internally used 'CF00' Grid square in the wideband experience based Hint decoder, callsign truncation to 5 characters at displaying of the decoded WSPR messages, withdrawn 13-character limitation in Configuration line edit for macros entry, truncation of text on labels in the main interface status bar, alignment of messages color background in the RX frequency window

- modified main window UI1 and Configuration UI, added link to JTDX Web page in the Help

- configurable automatic clearance of DXCall DXGrid upon exit from JTDX is added for UR5EQF logbook software users

- added beep notification on the first decoded message in the RX interval

- added combobox color notification if text message length in the Free text message combobox is exceeded 13 (for free message) and 17 (for directional CQ message with 6-character callsign) characters

- added background color notification about current minute and TX ODD/EVEN checkbox settings

- reworked wideband previous intevals data based Hint decoder, it is made as selective one to the expected message and internally splitted to 6 focused decoders. In result is reduced number of the false Hint decodes. Total number of Hint decoder subroutines in v17.5 is 11, total number of the Hint decoders now is 16.

- reworked DXCall/DXGrid based Hint decoder of the CQ messages, now any directional CQ message being supported in this decoder

- FTRSD and wideband CQ/CQ DX messages Hint decoders bypass is applied, if SNR of the candidate signal is less than -30.0dB SNR. A bit decreased time of decoding and number of the false Hint decodes.

- For BM/FTRSD decoder is added three more decoding passes focused on the QSO RX frequency (bandwidth is +-3Hz), time to frequency domain conversion and candidate list renew being used for each of these decoding passes, up to two candidates in the list per each decoding pass. This functionality is applied after the first wideband decoding pass and may not be turned OFF, only BM/FTRSD decoder being involved in this functionality, decoding efficiency is optimized. User can set number of RX frequency decoding attempts for the new RX frequency decoding passes in the Advanced tab. There is solid increase in FTRSD decoding efficiency of the weak signals on the RX frequency for minimum number of the decoding attempts set in Advanced tab. With this functionality JTDX may decode up to 7 signals on the QSO RX frequency.

- changed bandwidth for noise part of SNR calculation from approximately 560 to 180Hz, SNR is recalibrated using simulated signals from .wav files

- Y being added to the wsjtx_log.adi file if QSO data is sent to eQSL server, waiting for response from the eQSL server is increased to 10 seconds


 


 

Recommended settings for v17.5:

- JT65+JT9 combined mode

- AGCc button: use it only if AGC being triggered in receiver by JT signals at beginning of the RX interval. Noise level change in the waterfall might be used as criterion showing that AGC is triggered in the receiver.

- Hint button: use it to decode signals on the QSO frequency and for wideband hinted decoding of the CQ messages

- Clean DX, use it to clean DX Call DX Grid windows if data there is not required, this way user could avoid some false hinted decodes

Advanced settings tab:

- Number of decoding attempts: set it as per required decoding time. It might be set to 1 if CPU frequency is 2GHz, and set to 3 if CPU frequency is equal to 3GHz. Higher values make better decoding performance.

- Number of decoding passes = 4 (may be set to 3 or 2 for CPU frequency less than 2GHz if decoding attempts=1 is not enough to get into 10 second decoding time). For VHF usage optimal number of decoding passes = 2, and number of decoding attempts may be increased to improve decoding efficiency.

- RX frequency decoding attempts: set it to 1 for slow CPU, 2 for fast CPU. Value 3 may be used for 8+ core CPUs.

- Hinted decoding DT range = 1

Frequency range on the waterfall: set waterfall window size to the frequency range you wish to be decoded. Bins/Pixel settings would let user to choose suitable waterfall window size. Any signal located outside of the watefall graph WILL NOT be decoded.

To get proper hinted decoding and FTSRD false decodes filtering operation CALL3.TXT file shall be copied to the JTDX log directory (from JTDX sofyware File -> Open log directory).

JTDX v17.5 software making some false FTRSD and hinted decodes.
Any hinted decode, marked with asterisk, being blocked for sending to the pskreporter.info server, but may be reported by JTAlert software to the hamspots.net server.

Warning: high number of decoding attempts setting and SWL mode take high CPU utilisation for prolonged time, causing greater power consumption and increased power dissipation/CPU cooling requirements.

* 環境設定ファイルについて。

Upgrade from earlier JTDX v17.x versions to JTDX v17.5 and backwards: JTDX.INI file has different structure, it is recommended to delete old JTDX.INI Also it is recommended to use latest version of the CALL3.TXT file.

Detailed instructions on how to delete JTDX.INI file are published there.

* 使用パソコンについて。

JA2ANX 稲垣OMのページに登録してあります、
Report_E v1.03 JT65A パソコンの能力とは? 摺り剥がし技法の視点」をご参照ください。


 


 

改版内容 JTDX v17.5.1:

JTDX v17.5.1 is based on the v17.5 source code

- recovered AGCc functionality that is broken in v17.5

- added notification for possibly false FTRSD decoded standard messages: questionmark with yellow background, right after the message. Such messages being blocked for sending to the pskreporter.info server.


 


 

Recommended settings for v17.5.1:

- AGCc button: use it only if AGC being triggered in receiver by JT signals at beginning of the RX interval. Noise level change in the waterfall might be used as criterion showing that AGC is triggered in the receiver.

- Hint button: use it to decode signals on the QSO frequency and for wideband hinted decoding of the CQ messages

- Clean DX, use it to clean DX Call DX Grid windows if data there is not required, this way user could avoid some false hinted decodes

Advanced settings tab:

- Number of decoding attempts: set it as per required decoding time. It might be set to 1 if CPU frequency is 2GHz, and set to 3 if CPU frequency is equal to 3GHz. Higher values make better decoding performance.

- Number of decoding passes = 4 (may be set to 3 or 2 for CPU frequency less than 2GHz if decoding attempts=1 is not enough to get into 10 second decoding time). For VHF usage optimal number of decoding passes = 2, and number of decoding attempts may be increased to improve decoding efficiency.

- RX frequency decoding attempts: set it to 1 for slow CPU, 2 for fast CPU. Value 3 may be used for 8+ core CPUs.

- Hinted decoding DT range = 1

Frequency range on the waterfall: set waterfall window size to the frequency range you wish to be decoded. Bins/Pixel settings would let user to choose suitable waterfall window size. Any signal located outside of the watefall graph WILL NOT be decoded.

To get proper hinted decoding and FTSRD false decodes filtering operation CALL3.TXT file shall be copied to the JTDX log directory (from JTDX sofyware File -> Open log directory).

JTDX v17.5.1 software making some false FTRSD and hinted decodes. Any hinted decode marked by asterisk and FTRSD decodes marked questionmark, being blocked for sending to the pskreporter.info server, but may be reported by JTAlert software to the hamspots.net server.

Warning: high number of decoding attempts setting and SWL mode take high CPU utilisation for prolonged time, causing greater power consumption and increased power dissipation/CPU cooling requirements.


 


 

改版内容 JTDX v17.5.2:

JTDX v17.5.2 is based on the v17.5.1 source code

- some WSJT-X patches are applied: 6581,6588,6589,6590,6597,6599,6618,6622,6636,6650,6651,6658,6659,6660,6661,6703, 6705,6750,6755,6766,7030,7031,7032,7038,7039,7122,7124,7130,7293,7320,7390,7357,7457

- skipped audio .wav files recording to HDD if user selected 'Save -> None'

- reworked anti-aliasing filter for 48000 -> 12000 Hz sampling rate conversion of the RX signal

- decoded standard messages for worked DXCC/Grid square/Callsign may now be skipped in the decoded messages window using new control checkbox 'Don't show it' in the Notifications tab. This functionality may be applied to CQ messages by default and to other standard messages if 'Check other standard messages' checkbox is checked there.

- updated Hamlib to the latest version

- several changes done to prevent dupe Hint decodes appear in the decoded message window

- software development kit is changed from Qt 5.2 to Qt 5.5. There now more fonts available in the JTDX drop down menu, also decreased size of the JTDX installation package. Those users who building JTDX themselves under MS Windows shall now switch Qt environment using commands 'enable-qt55' and 'build-hamlib3'.

- KG4W callsign is added to cty.dat file VA, USA

- added combobox color notification if text message length in the tx5 message combobox, tab 1 of QSO messages, is exceeded 13 (for free message) and 17 (for directional CQ message with 6-character callsign) characters

- fixed bug in Filter functionality: in previous versions left mouse button double click on the waterfall caused whole JT65 frequency range decoding instead of the 400 Hz.

- several criteria are applied to prevent false CQ Hint decodes in presence of the strong JT65 signal on the band

 


 

改版内容 JTDX v17.6.0:

JTDX v17.6 is based on the v17.5.2 source code

ATTENTION: built v17.6 package has shifted dynamic range towards weak signals and superior performance in weak signal decoding by FTRSD at poor propagation conditions if there are less than 12 signals on the band. Top part of dynamic range will be addressed in v17.6.1 where the same source code will be used, difference only in the specific build. So far we do not know why dynamic range being shifted at specific build.

- fixed bug of color inversion in the notification functionality, occured if there is not any checking criterion chose.

- fixed bug where TX mode was changed if there other mode signal is decoded on the RX frequency

- fully dynamic decoding attempts recalculation based on the remaining number of candidates per each wideband decoding pass. It has brought some more efficiency for weak signals decoding by FTRSD if there are few signals on the band.

- 'hide messages from continents' functionality: it is some kind of the virtual DX window where local signals may being not shown. Effectevily reducing information overloading to user.

- 'beep on the wanted callsign' functionality: it will let user to avoid continious visual screen monitoring, replacing it with the sound notification. System sound being used from default playback device set in the operating system. At the moment callsign lenght is limited to 6 characters. Rest of any decoded message shown on the screen being checked for the wanted callsign.

- some improvement of the AGC compensation functionality for JT65 signal decoding

- changes in the mainwindow interface: TX odd/even checkbox is replaced with the button, more suitable allocation is chose for it.

- now JTDX does support up to 200 JT65 decoded messages

- two frequency mask decoding passes added. Frequency mask being derived from the first decoding pass. Frequency mask decoding is enabled in the code by default, depending on number of the signals on the band software making decision to turn it OFF (software does recognize band conditions and frequency mask decoding can be automatically turned off if there are too many signals on the band). New setting in the Advanced tab does prohibit turning frequency mask decoding passes OFF, it makes some benefit for overloaded band scenario and shall be used if user has fast CPU.

- 'bad data' diagnostic print is replaced with 'audio gap detected'. In such scenario some sample being filled with 1.0 value and software attempting to decode this RX interval. It was not allowed in the previous JTDX versions.

- reduced number of calculations and expanded time range for weak level of the input signal detection. Diagnostic print 'low rms' is replaced with the 'input signal low rms', as in the previous JTDX versions such RX interval being not passed to the decoders.

- increased number of processed records: up to 40k in file ALLCALL.TXT and up to 35k in file CALL3.TXT

- updated in software file ALLCALL.TXT. There is new CALL3.TXT being supplied along with the software package, this new file is not compatible with JTDX software versions earlier than v17.6.

- changed type of data in the large Hint arrays from 4 bytes to the 1 byte. It has allowed to decrease allocated memory volume caused by the CALL3 file extension.

- audio buffer size is changed in software: for input signal from 100ms to 2 seconds, for output signals from 1 to 2 seconds

- top frequency border for JT65 signal decoding is increased from 2700Hz to 3000Hz


 


 

改版内容 JTDX v17.6.1:

JTDX v17.6.1 is based on the v17.6 source code

v17.6.1 has effective JT65 signals decoding in overcrowded band conditions. v17.6 has better sensitivity for weak signal decoding in low populated band conditions versus v17.6.1. There are two possible reasons to make upgrade from v17.6 to v17.6.1: if user has slow CPU and can not use frequency mask decoding, or user need to fix bugs described below. Also both version can be used on the same computer if installed in the different folders.

- fixed bug in inverse color notifications for other standard messages

- fixed bug in distance calculation for grid QTH square on the same longtitude: applied WSJT-X patch r7045.

 


 

改版内容 JTDX v17.7.0:

JTDX.INI file has new structure, please backup and delete old JTDX.INI file prior to the first run of new software.

Step 60 has already came through the tests with good results and will be published within the next 24 hours.

Change log:

- there is a gap in 1st second of input data under Windows XP, source code is changed to fill in this gap and to prevent 'audio gap detected' diagnostic message to appear on the screen in this scenario

- now JTDX works with no CALL3.TXT file, while there some functionality will be missed in Hint decoders and recognition of the false FTRSD decodes if CALL3 file is missed. There are up to 4 reminders to copy CALL3.TXT file to the log directory after each start of the JTDX software, each reminder being triggered by various parts of the source code.

- changed program's icon and installation logo

- added waterfall graphics for Filter button

- increased allowed length from 'beep on wanted callsign' to 11 characters

- added validators for DX Call, DX Grid and wanted callsign windows line edit

- changes for the signal meter: range expanded to 90dB, measuring peak values rather than rms, color being changed for too weak or too strong signal. Signal meter indication now allowing user to match input signal dynamic range with ADC dynamic range and JTDX dynamic range, also can be used to evaluate noise level of the sound card's input.

- RX gain slider deleted from main user interface.

- new 'Filter' tab in configuration user interface

- added 'hide free messages' filter option for non RX frequency

- reduced minimal size and changed proportions for large size of the main user interface

- redistributed number of decoding attempts for Advanced tab settings 'Number of decoding attempts' =1 or =2, users with these settings will get more weak signals decoded in comparison to v17.6

- fixed bugs: wrong UTC at decoding again in JT9 mode (Decode button usage), prolonged decoding at decoding again in JT9 mode (Decode button usage)

- increased decoding efficiency of JT9 Fano decoder at RX frequency: more decoding attempts being used

- decoding JT9 again: for TX mode = JT9 pushing Decode button triggering attempt to decode JT9 signal on RX frequency again with more decoding attempts being used, bringing the best decoding efficiency. Decoding bandwith is +-2 Hz relatively to the RX frequency, number of candidates is limited to 2.

- changed 'decode again' logic: if TX mode is set to JT9 then JT65 decoder will be bypassed, if TX mode is set to JT65 then JT9 decoder will be bypassed

- enabled decoding at rest of RX interval: decoding after late start of JTDX, decoding after the halted TX in the same minute interval. Threshold is set to 35th second of the minute interval and it is still possible to decode -01dB SNR JT65 signals from remaining 12 seconds of message transmission. Band change: if it is changed prior 35th second of an RX interval then signals from both bands will be decoded, if it is changed after 35th second of an RX interval then signals from previous band will be decoded.

- added new 20m subband in selection for shared JT65/JT9 operation from 14080 to 14085 KHz.

 


 

改版内容 JTDX v17.8:

JTDX v17.8 is based on the v17.7 source code

- fixed bug: dupe JT9 message shall not be passed to the decoded text window if delta frequency between these signals is less than 17 Hz

- JT9 decode again functionality with mouse's left button double click now triggering decoding of JT9 signals in frequency span +- 20Hz from frequency selected on the waterfall

- implemented message text filters that will allow to show only 'CQ' or 'CQ, RRR, RR73, 73' messages in the decoded text window. New filters do not process messages with 'MyCall'. New text filters can be activated in the 'Filters' tab of settings

- ALLCALL.TXT file is updated, CALL3.TXT file as of 31.03.2017 is supplied together with the software package

- implemented band scheduler functionality, now user can schedule band switching in transceiver. Antenna switching is not supported in JTDX, band scheduler will not change band if 'Enable TX' button is active. Up to five band can be scheduled, functionality can be activated in the 'Scheduler' tab of settings.

- possibly false JT65 FTRSD decoded messages now can be forbidden for transmission via UDP to external software, for instance to JTAlert, reducing number of the false sound notifications and number of the false spots being sent to the hamspots.net server. This functionality is turned on by default and can be deactivated by user in 'Reporting' tab of the settings.

- ramp is implemented in modulator for first tone of transmission, it should reduce interference at beginning of the minute interval

- JT10 mode is implemented with sensitivity threshold close to -28dB SNR. Coding is taken from JT9 mode, modulation is modified: two lower tones are used for SYNC vector, 8 upper tones are used for message data, frequency bin (tone) width is around 1.7 Hz, minimal distance between two neighbouring tones is around 6.9 Hz, occupied bandwidth is around 65 Hz, message transmission takes close to 49 seconds. 'Filter' button limits decoding bandwidth to 160 Hz, software will try to decode any JT10 signal with SYNC vector located inside this bandwidth.
JT10 mode being considered as alternative to JT65A, with benefits of sensitivity, spectra density and resistance to the Doppler frequency spreading.
Signal subtraction and Hint decoding is not yet supported for JT10 mode.

- 14080..14085 KHz subband, assigned in v17.7 for shared JT65/JT9 operation, now is reallocated to JT10.

There are two timers implemented to limit JT10 decoding time: 12 seconds for on air operation and 30 seconds for SWL mode. JT10 candidate list being ranked by SYNC power, strongest signals will be decoded first, there are up to 200 candidates allowed in the list. Remaining in the list candidates will be dropped if decoding timer is expired.

Decoding again functionality of JT9/JT10 signals is different from JT65A one: +-3 Hz frequency span being used if 'Decode' button is pressed, +- 20 Hz frequency span being used if user double clicking by mouse's left button on the waterfall. Software using this span to look for the SYNC pattern.

 


 

改版内容 JTDX v17.9:

JTDX v17.9 is based on the v17.8 source code

- JT10 mode is renamed to T10 (stands for 'tonal 10')

- fixed bug: there were dupe decoded messages of the strong T10 signals. Now 45 Hz distance is being used to ban dupe T10 decoded messages

- two pass decoding with signal subtraction is implemented to T10 and JT9 modes

- fixed bug in T10 and JT9 message generators, 69th(last) data tone there was corrupted

- five QSO RX grequency Hint decoders implemented to T10 and JT9 modes:
DXCall based decoders for messages: 'MyCall HisCall Grid', report, R+report and RRR/RR73/73 CALL3 based decoder for message: 'MyCall HisCall Grid'.
DT range from -0.5 to +1.5 second and frequency span +-2 Hz is applied to all QSO RX frequency T10/JT9 Hint decoders

- T10 decoding passes timer is changed to 5+5 seconds

- TCP client is implemented to pass QSO data in single ADIF string to the external logbook software.
Connection to DXKeeper, N1MM and Logger32 logbook software is being supported.
TCP client can be configured and activated in Reporting tab of the settings.

- user defined frequency ceiling is added to JT65 decoder and Advanced tab of the settings is updated with the new parameter, by default it is set to 3000 Hz

- Hamlib version is updated (as of June 3rd, 2017)

- fixed bug: signal report was extracted from last of the several decoded messages having 'MyCall' in the current time interval, now message with HisCall (DxCall) being used for signal report extraction

- added new functionality: left mouse button double click on any 'MyCall HisCall (R)report' decoded message triggering extraction of the signal report

- 30MHz limit is withdrawn for recording frequency changes into ALL.TXT file if 'TX frequency changes is not allowed while transmitting' in general tab of the settings

- ALLCALL.TXT file is updated, version as of June 12th, 2017

- fixed bugs where change of band or mode in the current RX interval triggered early additional decoding and Halt TX then TX message change and continue TX, triggered early decoding in the next interval

- wsjtx_log.adi file processing is changed to accept multistring structure for single QSO record. Now ADIF export from DX4WIN logbook can be added into wsjtx_log.adi file

 

警告

SWL ON mode takes high CPU utilisation for prolonged time, causing greater
power consumption and increased power dissipation/CPU cooling requirements.

「SWL ON」時はCPUパワーを長時間最大限使用しますので冷却などに注意してください。
また旧型CPUなどでは使用に難がある場合もあります。その際にはmod8以前の版の使用をお勧めします。


 

JTDX WSJT-X v1.7 based HF evaluation version by UA3DJY Igor さん版について

JTDX WSJT-X v1.7 based HF evaluation version by UA3DJY は2016年8月6日から一般公開版となりました。
JT65-DX.com ではUA3DJY Igorさんから公開配布承諾を得て日本向け公式配布サイトとなりました。

* 過去のバージョンはUA3DJY Igorさんの意向により公開していません。

RevisionDownloads File NameModifiedSize
JTDX v17.9JTDX-17.9-win32.zip2017. 06. 1725MB
JTDX v17.8JTDX-17.8-win32.zip2017. 05. 0325MB
RevisionDownloads File NameModifiedSize
CALL3_TXT 12-06-2017CALL3_12_06-2017.zip2017. 06. 120.8MB
CALL3_TXT 03-01-2017CALL3_03-01-2017.zip2017. 01. 030.8MB
CALL3_TXT 12-12-2016CALL3_12-12-2016.zip2016. 12. 120.8MB
CALL3_TXT 07-11-2016CALL3_07-11-2016.zip2016. 11. 290.8MB

 

Digital Mode DX Group

Notice : Join Us Now !
Click here for What's Hot ! Digital Mode DX Group.

facebook-top

Page top